LUMMA TUNINGSPARTS CLR R
CURRENT AVAILABLE REFINEMENT COMPONENTS BY LUMMA-DESIGN

 © LUMMA-Design
 © LUMMA-Design
 © LUMMA-Design
 © LUMMA-Design
 © LUMMA-Design

LUMMA EXTERIOR - AERODYNAMIC

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA REBUILDING KIT CLR R WITH CLR RACING*
LUMMA Rebuilding kit CLR R with wheel set CLR Racing*
ONLY for cars WITHOUT rollout sidestep

composed of:
- Frontspoiler bumper with daylight running light frame
- Frontspoiler buttom part
- Wheel arch enlarging front and rear
- Door paneling for all 4 doors
- rear bumper with rear diffuser (for cars with trailer coupling too)
- daylight running lights kit 4-pcs., chrom-design
- High-beam headlamp kit, halogen-version, chrom-design
- Fog-lights mounting kit, halogen-version, chrom-design
- Wheel set LUMMA CLR Racing black smoke 12x22 ET35
with tires 305/35-22, Michelin Pilot Super Sport, Fuel efficiency: C, wet grip: A, noise emission: 73 db
- Performance wheel spacers, front 22mm, rear 47mm
- Stainless steel sport muffler with LUMMA design rear cover left and right
- Adapter for series pre silencer left and right
- Type lettering LUMMA CLR R 2-fold for front and rear
- Assembly material
- Type plate with consecuntive serial mumber
- with Part certificate ( without Frontspoiler bumper)

NOT included in the Bodykit is item RRS100.200.010, pls. order separately !
Not fitting for vehicle from MY 2018

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RR 100.100.100

 © LUMMA-Design inquiry
LUMMA REBUILDING KIT CLR R WITH CLR RACING*
LUMMA Rebuilding kit CLR R (LWB) with wheel set CLR Racing*
For long wheel base vehicle
ONLY for cars WITHOUT rollout sidestep

composed of:
- Frontspoiler bumper with daylight running light frame
- Frontspoiler buttom part
- Wheel arch enlarging front and rear
- Door paneling for all 4 doors
- rear bumper with rear diffuser (for cars with trailer coupling too)
- daylight running lights kit 4-pcs., chrom-design
- High-beam headlamp kit, halogen-version, chrom-design
- Fog-lights mounting kit, halogen-version, chrom-design
- Wheel set LUMMA CLR Racing black smoke 12x22 ET35
with tires 305/35-22, Vredestein, Fuel efficiency: C, wet grip: A, noise emission: 73 db
- Performance wheel spacers, front 22mm, rear 47mm
- Stainless steel sport muffler with LUMMA design rear cover left and right
- Adapter for series pre silencer left and right
- Type lettering LUMMA CLR R 2-fold for front and rear
- Assembly material
- Type plate with consecuntive serial mumber

NOT included in the Bodykit is item RRS100.200.010, pls. order separately !
Not fitting for vehicle from MY 2018

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RRL 100.100.105

 © LUMMA-Design inquiry
OPTIONAL: WHEEL SET CLR 23 GT FOR REBUILDING KIT CLR R*
Surcharge for Wheel set CLR 23 GT for rebuilding kit CLR R instead of CLR Racing*
front and back 11x23 with tyre equipment 305/30 R23
Continental CrossContact
Fuel efficiency: E, wet grip: A, noise emission: 75db
additionally TPC-sensors

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RR 001.100.023

 © BILD_COPYRIGHT_DEFAULT inquiry
OPTIONAL: WHEEL SET CLR 24 RS FOR REBUILDING KIT CLR R*
Surcharge for Wheel set CLR 24 RS for rebuilding kit CLR R instead of CLR Racing
front 10,5x24 with tyre equipment 295/30 R24
back 13x24 with tyre equipment 355/25 R24
Vredestein Ultrac Vorti
Fuel efficiency: E, wet grip: B, noise emission: 73db
additionally TPC-sensors

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RR 001.100.024

 © BILD_COPYRIGHT_DEFAULT inquiry
ASSEMBLY AND LAQUER FINISHING REBUILDING KIT CLR R
Assembly and laquer finishing Rebuilding kit CLR R
Non-metallic paint

Metallic paint 15% surcharge
Pearlescent paint 20% surcharge

RR 100.100.101

lumma piktogramme 301 lackieren.jpg © LUMMA-Design inquiry
LUMMA SPORT FRONT GRILLE CLR R VERSION II*
LUMMA sport front grille CLR R version II, with plastic mesh in black, paintable*
Not fitting for vehicle from MY 2018

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RR 100.200.012

 © LUMMA-Design inquiry
LUMMA SPORT FRONT GRILLE CLR R VERSION I WITH MESH*
LUMMA sport front grille CLR R version I with bar and aluminium mesh black, paintable*
Not fitting for vehicle from MY 2018

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RRS 100.200.010

Range Rover 2013 Tuning © LUMMA-Design inquiry
LAQUER COSTS SPORT FRONT GRILLE
laquer costs sport front grille
Non-metallic paint

Metallic paint 15% surcharge
Pearlescent paint 20% surcharge

RRS 100.200.011

lumma piktogramme 301 lackieren.jpg © LUMMA-Design inquiry
ASSEMBLY SPORT FRONT GRILLE
Assembly sport front grille

RRS 100.200.012

lumma piktogramme 301 montieren.jpg © LUMMA-Design inquiry
LUMMA SPORT-LOOK ENGINE HOOD CLR R*
LUMMA sport-look engine hood CLR R solid-carbon with air vent openings, paintable*
Not fitting for vehicle from MY 2018

*Important Notice for consumers: Without part certificate. This article is not for use in the public road traffic allowed - use only for racing purposes!
By installing this article, the vehicle's operating permit will expire.

RRS 200.100.010

 © LUMMA-Design inquiry
LUMMA ROOF SPOILER CLR R*
LUMMA roof spoiler CLR R, paintable*

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RRS 300.200.014

 © LUMMA-Design inquiry
LAQUER COSTS ROOF SPOILER
laquer costs roof spoiler
Non-metallic paint

Metallic paint 15% surcharge
Pearlescent paint 20% surcharge

RRS 300.200.020

lumma piktogramme 301 lackieren.jpg © LUMMA-Design inquiry
ASSEMBLY ROOF SPOILER
Assembly roof spoiler

RRS 300.200.025

lumma piktogramme 301 montieren.jpg © LUMMA-Design inquiry
LUMMA REAR SPOILER LIP CLR R, PAINTABLE*
LUMMA rear spoiler lip CLR R, paintable*

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RRS 300.100.100

 © LUMMA-Design inquiry
LACQUER FINISH REAR SPOILER LIP CLR R
Lacquer finish rear spoiler lip CLR R
Non-metallic paint

Metallic paint 15% surcharge
Pearlescent paint 20% surcharge

RRS 300.100.101

lumma piktogramme 301 lackieren.jpg © LUMMA-Design inquiry
ASSEMBLY REAR SPOILER LIP CLR R
Assembly rear spoiler lip CLR R

RRS 300.100.102

lumma piktogramme 301 montieren.jpg © LUMMA-Design inquiry


LUMMA EXTERIOR - CARBON BLACK

IDENTIFICATION PART NO. FIGURE INQUIRY
MIRROR CAP SET CARBON-DESIGN
Mirror cap set carbon-design, mirror upper part left & right

RRS 600.300.100

Range Rover 2013 Tuning © LUMMA-Design inquiry
DECORATIVE TRIM FRONTAL COVERING CARBON-DESIGN
Decorative trim frontal covering carbon-design, 3-pcs., center, left & right

RRS 600.300.200

Range Rover 2013 Tuning © LUMMA-Design inquiry
DECORATIVE TRIM SET OF 6-PCS
Decorative trim set of 6-pcs., carbon-design, sidewise composed of door front, rear and side frame rear left & right (without door panel)

RRS 600.300.210

Range Rover 2013 Tuning © LUMMA-Design inquiry
DOOR COVER PLATE LEFT & RIGHT CARBON-DESIGN
Door cover plate left & right carbon-design, complete carbon to adhesive

RRS 600.300.300

Range Rover 2013 Tuning © LUMMA-Design inquiry
ENGINE HOOD COVER, CARBON-DESIGN,
Engine hood cover, carbon-design, solid carbon part to adhesive
Not fitting for vehicle from MY 2018

RRS 600.500.100

Range Rover 2013 Tuning © LUMMA-Design inquiry
REAR TRIM STRIP
Rear trim strip without rear view camera, carbon-design

RRS 600.400.110

Range Rover 2013 Tuning © LUMMA-Design inquiry
REAR TRIM STRIP FOR REAR VIEW CAMERA
Rear trim strip for rear view camera, carbon-design

RRS 600.400.100

Range Rover 2013 Tuning © LUMMA-Design inquiry
LUMMA SPORT-LOOK ENGINE HOOD, CARBON-DESIGN*
LUMMA sport-look engine hood, carbon-design
Not fitting for vehicle from MY 2018

*Wichtiger Verbraucherhinweis: Ohne ABE/Teilegutachten. Dieser Artikel ist nicht für die Nutzung im öffentlichen Straßenverkehr zulässig – Einsatz nur für Rennsportzwecke!
Durch Montage dieses Artikels erlischt die ABE des Fahrzeugs.

RRS 600.100.101

 © LUMMA-Design inquiry
LUMMA SPORT FRONT GRILLE, CARBON-DESIGN*
LUMMA sport front grille, carbon-design*
Not fitting for vehicle from MY 2018

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RRS 600.100.201

 © LUMMA-Design inquiry
LUMMA REAR SPOILER LIP, CARBON-DESIGN*
LUMMA rear spoiler lip, carbon-design*

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RR 600.200.001

 © LUMMA-Design inquiry


LUMMA EXTERIOR - LIGHT DESIGN

IDENTIFICATION PART NO. FIGURE INQUIRY
OPTION LUMMA DAYLIGHT RUNNING LIGHTS KIT BLACK
LUMMA daylight running lights kit black, only suitable with front spoiler bumper CLR-R
extra charge option Bodykit
2 sets required, price pro set

RR 100.150.XXX

 © LUMMA-Design inquiry
LUMMA DAYLIGHT RUNNING LIGHTS KIT BLACK
LUMMA daylight running lights kit black, only suitable with front spoiler bumper CLR-R
2 sets required.
price pro set

RR 100.150.013

 © LUMMA-Design inquiry
LUMMA DAYLIGHT RUNNING LIGHTS KIT CHROME
LUMMA daylight running lights kit chrome-design only suitable with front spoiler bumper CLR-R
(included in the Bodykit)
2 sets required, price pro set

RR 100.150.012

 © LUMMA-Design inquiry
LUMMA HIGH-BEAM HEADLAMP HALOGEN-VERSION
LUMMA high-beam headlamp Halogen-version consisting of 2 high-beam headlamp incl. cable set

FS 63039BC

 © LUMMA-Design inquiry
FOG LIGHTS MOUNTING KIT HALOGEN
Fog lights Mounting kit Halogen

NL 62070.1

 © LUMMA-Design inquiry
LUMMA HIGH-BEAM HEADLAMPS LED-VERSION CHROME DESIGN
LUMMA high-beam headlamps LED-version chrome design consisting of 2 incl. cable set

FS 66070

 © LUMMA-Design inquiry
LUMMA FOG-LIGHTS LED-VERSION CHROME DESIGN
LUMMA Fog-lights LED-version chrome design consisting incl. cable set

NL 64070.1

 © LUMMA-Design inquiry
LUMMA HIGH-BEAM HEADLAMPS LED-VERSION BLACK
LUMMA High-beam headlamps LED-version black consisting of 2 high-beam headlamps incl. cable set

FS 67070

 © LUMMA-Design inquiry
LUMMA FOG-LIGHTS LED-VERSION BLACK
LUMMA Fog-lights LED-version black consisting of 2 fog lights incl. cable set

NL 65070.2

 © LUMMA-Design inquiry


LUMMA CHASSIS / WHEELS - SET OF SPACERS

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA SET OF SPACERS
LUMMA set of spacers, suitable for wheel set CLR Racing, front 22 mm, rear 47 mm
Only suitable in combination with rebuilding Kit CLR R, CLR R GT EVO or CLR RS

With part certificate

RR 900.200.011

 © LUMMA-Design inquiry
LUMMA SET OF SPACERS, 20 MM PER SIDE
LUMMA set of spacers, 20 mm per side, suitable fo 1 axle (2 pcs.)
Suitable for series wheels and series car

With part certificate

RRS 900.200.020

 © LUMMA-Design inquiry


LUMMA CHASSIS / WHEELS - SET OF WHEELS

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA WHEEL SET CLR LN1 BLACK MATTE, 10X22*
LUMMA wheel set CLR LN1 black matte, mounted and balanced, front and rear 10x22 ET 35 with tyre 295/35-22*
PCD 5x120, CB 74.1, offset 35
incl. wheel nut
Yokohama Advan Sport
Fuel efficiency: E, wet grip: A, noise emission: 75db

Also suitable for series car

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RRS900.100.100

CLR LN1 black © LUMMA-Design inquiry
LUMMA WHEEL SET CLR LN1 BLACK MATTE, 12X22*
LUMMA wheel set CLR LN1 black matte, mounted and balanced, front and rear 12x22 ET 35 with tyre 305/35-22*
incl. wheel nut black
Michelin Pilot Super Sport
Fuel efficiency: C, wet grip: A, noise emission: 73 db

Only in connection with the LUMMA bodykit CLR R, CLR R GT EVO, CLR RS, CLR SV, CLR F

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RR900.100.120

CLR LN1 black © LUMMA-Design inquiry
LUMMA WHEEL SET CLR RACING BLACK-SMOKE, 10X22*
LUMMA wheel set CLR Racing black-smoke, mounted and balanced, front and rear 10x22 ET 35 with tyre 295/35-22*
PCD 5x120, CB 74.1mm, offset 35
incl. wheel nut
Yokohama Advan Sport
Fuel efficiency: E, wet grip: A, noise emission: 75db

Also suitable for series car

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RE 900.100.740

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA WHEEL SET CLR RACING BLACK-SMOKE 12X22*
LUMMA wheel set CLR Racing black-smoke, mounted and balanced, front and rear 12x22 ET 35 with tyre 305/35-22*
PCD 5x120, CB 74.1mm, offset 35
incl. wheel nut black
Michelin Pilot Super Sport, Fuel efficiency: C, wet grip: A, noise emission: 73 db

Only in connection with the LUMMA bodykit CLR R, CLR R GT EVO, CLR RS

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RE 900.100.730

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA WHEEL SET CLR 23 GT BLACK MAT, 11X23*
LUMMA wheel set CLR 23 GT black mat, mounted and balanced, front & rear 11x23 ET 40 with tyre 305/30-23*
incl. wheel nut black
Continental CrossContact
Fuel efficiency: E, wet grip: A, noise emission: 75db

Also suitable for series car

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RR 900.100.700

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA WHEEL SET CLR 24 RS*
LUMMA wheel set CLR 24 RS matte black*
in multi part appearance with centre locking design cap
PCD: 5x120 HB: 74,1 ET40
front 10,5x24 with tyre equipment 295/30 R24
back 13x24 with tyre equipment 355/25 R24
Vredestein Ultrac Vorti
Fuel efficiency: E, wet grip: B, noise emission: 73db
***

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RRS900.100.024

 © BILD_COPYRIGHT_DEFAULT inquiry


LUMMA CHASSIS / WHEELS - ALLOY RIMS

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA SPORT RIM CLR 22 LX 10X22*
LUMMA sport rim CLR 22 LX 10x22*
PCD: 5x120, CB: 74,1, offset 35
Colour: Black Smoke

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE022.010.G01

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR 22 LX 12X22*
LUMMA sport rim CLR 22 LX 10x22*
PCD: 5x120, CB: 74,1, offset 35
Colour: Black Smoke

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE022.012.G01

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR LN1 10X22*
LUMMA sport rim CLR LN1 black matte 10x22*
PCD 5x120, CB 74.1, offset 35
Inclusive hub cap in central locking design
Also suitable for series car

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE022.010.E01

CLR LN1 black © LUMMA-Design inquiry
LUMMA SPORT RIM CLR LN1 BLACK MATTE 12X22*
LUMMA sport rim CLR LN1 black matte 12x22*
PCD 5x120, CB 74.1, offset 35
Inclusive hub cap in central locking design

Only in connection with the LUMMA bodykit CLR R, CLR R GT EVO, CLR RS, CLR SV, CLR F

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE022.012.E01

CLR LN1 black © LUMMA-Design inquiry
LUMMA SPORT RIM CLR RACING BLACK-SMOKE, 12X22*
LUMMA Sportrim CLR Racing black-smoke, 12x22*
PCD 5x120, CB 74.1mm, offset 35

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE022.012.B01

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR RACING BLACK-SMOKE , 10X22*
LUMMA sport rim CLR Racing black-smoke, 10x22*
PCD 5x120, CB 74.1mm, offset 35
incl. wheel nut black

Also suitable for series car, recommended tyres 295/35-22

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE022.010.B01

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR RACING 2 11X23*
LUMMA sport rim CLR Racing 2 11x23 black matte*
PCD: 5x120, NB: 74,1, offset 40
with hub cap in centre lock design

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE023.011.E09

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR 23 GT BLACK MAT*
LUMMA sport rim CLR 23 GT 11x23, black mat*
with design ring silver
PCD 5x120, CB 74.1mm, offset 40 for BMW+RR

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE023.011.C02

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR 24 RS 10,5X24*
LUMMA sport rim CLR 24 RS 10,5x24 black mat*
in multi part appearance with centre locking design cap
PCD: 5x120 HB: 74,1 ET40

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE024.105.D09

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR 24 RS 13X24*
LUMMA sport rim CLR 24 RS 13x24 black matte*
in multi part appearance with centre locking design cap
PCD: 5x120 HB: 74,1 ET40

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE024.013.D09

 © BILD_COPYRIGHT_DEFAULT inquiry
TIRE PRESSURE MONITORING SYSTEM FOR VEHICLES WITH TPC
Tire pressure monitoring system for vehicles with TPC, installationkit for 4 wheels (European design)

RRS 900.100.500

 © LUMMA-Design inquiry
TIRE PRESSURE MONITORING SYSTEM FOR VEHICLES WITH TPC
Tire pressure monitoring system for vehicles with TPC, installationkit for 4 wheels (not European design)

RRS 900.100.510

 © LUMMA-Design inquiry


LUMMA INTERIOR - ALUMINUM

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA ALUMINIUM PEDAL SET
LUMMA Aluminium pedal set, consisting of gas-, brake pedal and footrest

With part certificate

RRS 000.300.000

 © LUMMA-Design inquiry


LUMMA INTERIOR - FLOOR MATTS BOOTMAT

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA FLOOR MATS BLACK, SET FRONT + REAR
LUMMA floor mats black, set of 3-pieces with leather mount and LUMMA logo
with double stitching in black

Fiber material: 100% polyamide 6.6
Pile weight: 550 +/- 10%
Surface structure: tufted suede
Edging: leather
Back coating: latex fine embossing

RRS 000.100.100

 © LUMMA-Design inquiry
LUMMA FLOOR MAT SET FRONT + REAR
LUMMA floor mat set of 3-pieces, with leather mount and LUMMA logo, color at choice
with double stitching colour at choice

Fiber material: 100% polyamide 6.6
Pile weight: 550 +/- 10%
Surface structure: tufted suede
Edging: leather
Back coating: latex fine embossing

RRS 000.100.110

 © LUMMA-Design inquiry


LUMMA INTERIOR - TRUNK MAT

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA BOOT MAT, COLOR AT CHOICE
LUMMA boot mat with leather mount and LUMMA logo, color at choice, with double stitching color at choice

Fiber material: 100% polyamide 6.6
Pile weight: 550 +/- 10%
Surface structure: tufted suede
Edging: leather
Back coating: latex fine embossing

RRS 000.200.111

 © LUMMA-Design inquiry


LUMMA MORE - ACCESSOIRES

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA SIGNATUR SCHWARZ
"LUMMA" Signature, approx. 110mm x 45mm black, self-adhesive

AKL 429RAA

 © LUMMA-Design inquiry
LUMMA SIGNATURE CHROME
"LUMMA" signature, approx. 110mm x 45mm chrome, self-adhesive

AKL 430 RAA

 © LUMMA-Design inquiry
LUMMA VALVE CAP 4-PCS.
LUMMA valve cap 4-pcs.

PM 45.1000

 © LUMMA-Design inquiry
LUMMA DESIGN LICENSE PLATE PAT
LUMMA Design license plate pat with embossed chrome logo signature LUMMA length 52 cm

KU 0041 WUC

 © LUMMA-Design inquiry
LUMMA DESIGN LICENSE PLATE PAT
LUMMA Design license plate pat with embossed gold logo signature LUMMA length 52 cm

KU 0043WUC

 © LUMMA-Design inquiry
LUMMA DESIGN EMBLEM (EMBLEM PROFILE)
LUMMA Design emblem (emblem profile), self-adhesive

AKL 400 RAA

 © LUMMA-Design inquiry
LUMMA KEY RING
LUMMA key chain solid leather with metal logo emblem profile

SAH 000 LEC

 © LUMMA-Design inquiry




LUMMA CONTACT

Interested in one of the refinement products? We are pleased to contact you for non-binding advice. We recommend to use the contact support.


LUMMA Design GmbH & Co. KG,

Weinstetter Strasse 5
72474 Winterlingen
Deutschland

+49 (0) 7577 / 933729-0
info@lumma-design.com


LUMMA QR-CODE

You can download this page directly to your phone.


HINT:

A QR-Code-scanner for your smartphone or tablet and a mobile internet-connection is required. Hereby costs can arise.

LUMMA QR-Code