LUMMA
TUNINGSPARTS CLR G800
CURRENT AVAILABLE REFINEMENT COMPONENTS BY LUMMA-DESIGN
| IDENTIFICATION | PART NO. | FIGURE | INQUIRY |
|---|---|---|---|
|
LUMMA REBUILDING KIT CLR G800 SUITABLE FOR 400/450/43 AMG/500 WITH CLR RACING LUMMA rebuilding kit CLR G800 suitable for 400/450/500 with CLR Racing material: PU RIM composed of: - part certificate of conformity - Frontspoiler parts at the side and central - Wheel arch enlarging front and rear - Side skirt set - Rear bumper with rear diffuser - Air inlet covers on back doors - Side skirt design covers - LUMMA Sport silencer Important Notice for Consumers: This article is not for use in the public road traffic allowed - use only for racing purposes! - Endpipes Carbon 4x100mm - Rim set LUMMA CLR Racing in front 10x22, 12x22 rear - Recommended tyres 285/40-22 front, 325/35-22 rear - Performance wheel spacers front and rear - Type lettering LUMMA CLR G800 for front and rear - LUMMA crest for engine bonnet and boot lid - Assembly material Positions GL 001.210.000 and GL 001.210.130 required |
GL 001.100.020 |
 |
inquiry |
|
LUMMA REBUILDING KIT CLR G800 SUITABLE FOR 63/63S AMG FOR CLR RACING LUMMA Rebuilding Kit CLR G800 suitable for 63/63s AMG for CLR Racing material: PU RIM composed of: - part certificate of confirmity - Frontspoiler parts at the side and central - Wheel arch enlarging front and rear - Side skirt set - Rear bumper with rear diffuser - Air inlet covers on back doors - Side skirt design covers - LUMMA Sport silencer Important Notice for Consumers: This article is not for use in the public road traffic allowed - use only for racing purposes! - Endpipes Carbon 4x100mm - Rim set LUMMA CLR Racing front 10x22, 12x22 rear - Recommended tyres 285/40-22 front, 325/35-22 rear - Performance wheel spacers front and rear - Type lettering LUMMA CLR G800 for front and rear - LUMMA crest for engine bonnet and boot lid - Assembly material |
GL 001.100.019 |
 |
inquiry |
|
LUMMA PERFORMANCE PACKAGE* LUMMA performance package* for LUMMA CLR G800 paintable, easy assembly consisting of: - Front spoiler cupsword - Sidebar cupsword right/left - Rear diffuser cupsword Rear diffuser cup splitter not suitable for vehicle with tow bar. * Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany). |
GL 001.200.100 |
 |
inquiry |
|
REAR DIFFUSER FRAME IN COLOR OF CHOICE Rear diffuser frame lacquered in color of choice Non-metallic paint Metallic paint 15% surcharge Pearlescent paint 20% surcharge |
GL 001.100.136 |
 |
inquiry |
|
EXTERIOR PARTS IN COLOR OF CHOICE Exterior parts: Air inlet covers, side skirt design covers, front spoiler bottom part lacquered in color of choice Non-metallic paint Metallic paint 15% surcharge Pearlescent paint 20% surcharge |
GL 001.100.137 |
 |
inquiry |
|
DOOR HANDLE COVER IN COLOR OF CHOICE door handle cover lacquered in color of choice Non-metallic paint Metallic paint 15% surcharge Pearlescent paint 20% surcharge |
GL 001.100.138 |
 |
inquiry |
|
REAR DECORATIVE STRIP IN COLOR OF CHOICE Rear decorative strip lacquered in color of choice Non-metallic paint Metallic paint 15% surcharge Pearlescent paint 20% surcharge |
GL 001.100.139 |
 |
inquiry |
|
LUMMA FRONT SPOILER LIP SUITABLE FOR AMG FRONT LUMMA front spoiler lip suitable for AMG front paintable part certificate of conformity |
GL 100.100.001 |
 |
inquiry |
|
LUMMA FENDER COVERS WITH DESIGN FINS LUMMA fender covers with design fins paintable only for rebuilding kit CLR G800 |
GL 100.100.016 |
 |
inquiry |
|
LUMMA REAR SPOILER LIP LUMMA rear spoiler lip paintable part certificate of conformity (standard german) |
GL 200.100.015 |
 |
inquiry |
|
LUMMA ROOF SPOILER LUMMA roof spoiler paintable part certificate of conformity (standard german) |
GL 300.100.020 |
 |
inquiry |
| IDENTIFICATION | PART NO. | FIGURE | INQUIRY |
|---|---|---|---|
|
AIR INLET COVER FRONT LEFT+RIGHT Air inlet cover front left+right in visible carbon fibre only for Bodykit CLR G800 |
GL 001.103.C00 |
 |
inquiry |
|
SIDE SKIRT DESIGN COVER LEFT+RIGHT Side skirt design cover left+right in visible Carbon fibre only for Bodykit CLR G800 |
GL 001.103.C01 |
 |
inquiry |
|
AIR INLET COVER REAR DOOR LEFT+RIGHT Air inlet cover rear door left+right in visible carbon fibre only for Bodykit CLR G800 |
GL 001.103.C02 |
 |
inquiry |
|
AIR OUTLET COVER ON REAR BUMPER LEFT+RIGHT Air outlet cover on rear bumper left+right in visible carbon fibre only for Bodykit CLR G800 |
GL 001.103.C03 |
 |
inquiry |
|
OUTSIDE MIRROR CAPS IN VISIBLE CARBON FIBRE Outside mirror caps in visible carbon fibre Surcharge at delivery of serial outside mirror caps |
GL 001.103.C06 |
 |
inquiry |
|
OUTSIDE MIRROR CAPS IN VISIBLE CARBON FIBRE Outside mirror caps in visible carbon fibre - new part |
GL 001.103.C07 |
 |
inquiry |
|
DOOR HANDLE COVER UPPER PARTS IN VISIBLE CARBON FIBRE Door handle cover upper parts in visible carbon fibre Surcharge at delivery of serial parts |
GL 001.103.C08 |
 |
inquiry |
|
DOOR HANDLE COVER UPPER PARTS IN VISIBLE CARBON FIBRE Door handle cover upper parts in visible carbon fibre new parts |
GL 001.103.C09 |
 |
inquiry |
|
REAR DECORATIVE STRIP IN VISIBLE CARBON FIBRE Rear decorative strip in visible carbon fibre Surcharge at delivery of serial part |
GL 001.103.C10 |
 |
inquiry |
|
REAR DECORATIVE STRIP IN VISIBLE CARBON FIBRE Rear decorative strip in visible carbon fibre new part |
GL 001.103.C11 |
 |
inquiry |
|
LUMMA REAR SPOILER LIP VISIBLE CARBON FIBRE FINISH LUMMA rear spoiler lip visible carbon fibre finish ready for assembly part certificate of conformity (standard german) |
GL200.200.C02 |
 |
inquiry |
|
LUMMA ROOF SPOILER IN VISIBLE CARBON FIBRE FINISH LUMMA roof spoiler in visible Carbon fibre finish; ready for assembly part certificate of conformity (standard german) |
GL300.200.C03 |
 |
inquiry |
|
SERIAL FRONT GRILLE BARS (GENUINE AMG) IN VISIBLE CARBON FIBRE Serial front grille bars (genuine AMG) in visible carbon fibre Surcharge at delivery of serial front grille bars |
GL 001.103.C04 |
 |
inquiry |
|
SERIAL FRONT GRILLE BARS (GENUINE AMG) IN VISIBLE CARBON FIBRE Serial front grille bars (genuine AMG) in visible carbon fibre new part |
GL 001.103.C05 |
 |
inquiry |
|
LUMMA SPORT-LOOK ENGINE BONNET* LUMMA sport-look engine bonnet* in carbon finish, with mesh set *Important Notice for consumers: Without part certificate. This article is not for use in the public road traffic allowed - use only for racing purposes! By installing this article, the vehicle's operating permit will expire. |
GL 500.200.C04 |
 |
inquiry |
|
SURCHARGE LACQUERING BICOLOR Surcharge lacquering Sportlook bonnet in carbon version bicolor lateral parts in vehicle color |
GL 500.200.C07 |
|
inquiry |
| IDENTIFICATION | PART NO. | FIGURE | INQUIRY |
|---|---|---|---|
|
LUMMA PERFORMANCE SPACER SET FOR CLR G800 LUMMA Performance spacer set for CLR G800 consisting of: 1 set FA spacers 25mm/side 1 set RA spacers 45mm/side 16 wheel bolts black M14x1,5x37 4 rim clips black 2 wheel locks Suitable for wheel set CLR Racing with Bodykit With part certificate |
GL 025.045.100 |
 |
inquiry |
| IDENTIFICATION | PART NO. | FIGURE | INQUIRY |
|---|---|---|---|
|
LUMMA SPORT RIM CLR RACING, 12X22 LUMMA SPORT RIM CLR RACING black smoke, 12X22 PCD: 5x112 NB: 66,6 offset 35 * suitable for series car (just rear axle), recommended tyres 325/35 R22 * With part certificate |
FE022.012.B10 |
|
inquiry |
|
LUMMA SPORTRIM CLR 22 LX 10X22 LUMMA sportrim CLR 22 LX 10x22 Colour Black Smoke PCD 5x112, HB 66,6 offset 35 Also fitting for standard vehicle With part certificate |
FE022.010.G10 |
|
inquiry |
|
LUMMA SPORTRIM CLR 22 LX 12X22* LUMMA sportrim CLR 22 LX 12x22* Colour Black Smoke PCD 5x112, HB 66,6 offset 35 Also fitting for standard vehicle * Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany). |
FE022.012.G10 |
|
inquiry |
|
LUMMA SPORT RIM CLR RACING BLACK-SMOKE , 10X22 LUMMA SPORT RIM CLR RACING black smoke, 10X22 PCD 5x112, CB 66.6mm, offset 45 * suitable for series car, recommended tyres 285/40 R22 * With part certificate |
FE022.010.B06 |
|
inquiry |
|
LUMMA SPORT RIM CLR 23 GT, 11X23 LUMMA SPORT RIM CLR 23 GT black matte, 11x23 PCD 5x112, CB 66.6mm, offset 45 With hub cap in central locking design * Suitable for serial car, recommended tyres 305/30 R23 * With part certificate |
FE023.011.C11/C12 |
|
inquiry |
|
LUMMA CLR RACING 2 11X23* LUMMA CLR Racing 2 11x23 black matte* PCD: 5x112, HB: 66,6 ET40 With hub cap in centre locking design * Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany). |
FE023.011.E13 |
|
inquiry |
|
LUMMA SPORT RIM CLR 24 RS 10,5X24* LUMMA Sport rim CLR 24 RS black matte 10,5x24* PCD 5x120, CB 74,1 mm, offset 40 with hub cap in central locking design * Recommended tyres 295/30 R24 * Suitable for front and rear axle * Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany). |
FE024.105.D13 |
|
inquiry |
|
LUMMA SPORT RIM CLR 24 RS, 13X24* LUMMA Sport rim CLR 24 RS black matte, 13x24* PCD 5x120, CB 74,1 mm, offset 38 with hub cap in central locking design * Recommended tyres 355/25 R24 * Only fitting for rear axle * Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany). |
F024.013.D14 |
|
inquiry |
| IDENTIFICATION | PART NO. | FIGURE | INQUIRY |
|---|---|---|---|
|
LUMMA ALUMINIUM PEDAL SET LUMMA Aluminium pedal set in silver alu finish with black rubber nubs, anti-slip consisting of gas-, brake pedal and footrest *In Alu finish black anodized on request against surcharge* |
GL 800.100.100 |
 |
inquiry |
| IDENTIFICATION | PART NO. | FIGURE | INQUIRY |
|---|---|---|---|
|
LUMMA FLOOR MATS LUMMA floor mats in black for front + back real leather mounting with double stiching and LUMMA emblem Fiber material: 100% polyamide 6.6 Pile weight: 550 +/- 10% Surface structure: tufted suede Edging: leather Back coating: latex fine embossing |
GL 800.200.000 |
 |
inquiry |
| IDENTIFICATION | PART NO. | FIGURE | INQUIRY |
|---|---|---|---|
|
LUMMA BOOT MAT LUMMA boot mat in black real leather mounting with double stiching and LUMMA emblem Fiber material: 100% polyamide 6.6 Pile weight: 550 +/- 10% Surface structure: tufted suede Edging: leather Back coating: latex fine embossing |
GL 800.200.100 |
|
inquiry |
| IDENTIFICATION | PART NO. | FIGURE | INQUIRY |
|---|---|---|---|
|
LUMMA KEY CHAIN CREST LOGO LEATHER STRAP BLACK LUMMA key chain crest logo leather strap black in present box with LUMMA logo |
SAH520 |
 |
inquiry |
|
LUMMA KEY CHAIN CREST LOGO METAL VERSION LUMMA key chain crest logo metal version in present box with LUMMA logo |
SAH500 |
 |
inquiry |
|
LUMMA KEY CHAIN PLATE METAL VERSION LUMMA key chain plate metal version In present box with LUMMA logo |
SAH510 |
 |
inquiry |
|
TYPE LETTERING WITH CREST LOGO CLR G800 Type lettering with crest logo CLR G800 self adhesive |
AKL800RAA |
 |
inquiry |
|
TYPE LETTERING WITH CREST LOGO CLR G800 Type lettering with crest logo CLR G800 on mounting plate with grub screws suitable for front grille |
AKLTR007 |
 |
inquiry |
|
LUMMA SNAPBACK CAP SIGNATURE EDITION GREY LUMMA Snapback cap "signature edition" GREY In present box MATERIAL: FRONT: 85% acrylic, 15% wool BACK: 100% polyester |
SAH600 |
 |
inquiry |
|
LUMMA SNAPBACK CAP SIGNATURE EDITION BLACK LUMMA Snapback cap "signature edition" BLACK In present box MATERIAL: FRONT: 85% acrylic, 15% wool BACK: 100% polyester |
SAH610 |
 |
inquiry |
Interested in one of the refinement products? We are pleased to contact you for non-binding advice. We recommend to use the contact support.
| LUMMA Design GmbH & Co. KG, |
|||||
|---|---|---|---|---|---|
|
Weinstetter Strasse 5 72474 Winterlingen Deutschland |
|
||||
You can download this page directly to your phone.
HINT:
A QR-Code-scanner for your smartphone or tablet and a mobile internet-connection is required. Hereby costs can arise.
