LUMMA TUNINGSPARTS CLR G800
CURRENT AVAILABLE REFINEMENT COMPONENTS BY LUMMA-DESIGN

LUMMA CLR G800 © LUMMA-Design
LUMMA CLR G800 © LUMMA-Design
G800 Teile 1 © LUMMA-Design
G800 Teile 2 © LUMMA-Design

LUMMA EXTERIOR - AERODYNAMIC

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA REBUILDING KIT CLR G800 SUITABLE FOR 400/450/43 AMG/500 WITH CLR RACING
LUMMA rebuilding kit CLR G800 suitable for 400/450/500 with CLR Racing
material: PU RIM
composed of:
- part certificate of conformity
- Frontspoiler parts at the side and central
- Wheel arch enlarging front and rear
- Side skirt set
- Rear bumper with rear diffuser
- Air inlet covers on back doors
- Side skirt design covers
- LUMMA Sport silencer
Important Notice for Consumers: This article is not for use in the
public road traffic allowed - use only for racing purposes!
- Endpipes Carbon 4x100mm
- Rim set LUMMA CLR Racing in front 10x22, 12x22 rear
- Recommended tyres 285/40-22 front, 325/35-22 rear
- Performance wheel spacers front and rear
- Type lettering LUMMA CLR G800 for front and rear
- LUMMA crest for engine bonnet and boot lid
- Assembly material
Positions GL 001.210.000 and GL 001.210.130 required

GL 001.100.020

 © LUMMA-Design inquiry
LUMMA REBUILDING KIT CLR G800 SUITABLE FOR 63/63S AMG FOR CLR RACING
LUMMA Rebuilding Kit CLR G800 suitable for 63/63s AMG for CLR Racing
material: PU RIM
composed of:
- part certificate of confirmity
- Frontspoiler parts at the side and central
- Wheel arch enlarging front and rear
- Side skirt set
- Rear bumper with rear diffuser
- Air inlet covers on back doors
- Side skirt design covers
- LUMMA Sport silencer
Important Notice for Consumers: This article is not for use in the
public road traffic allowed - use only for racing purposes!
- Endpipes Carbon 4x100mm
- Rim set LUMMA CLR Racing front 10x22, 12x22 rear
- Recommended tyres 285/40-22 front, 325/35-22 rear
- Performance wheel spacers front and rear
- Type lettering LUMMA CLR G800 for front and rear
- LUMMA crest for engine bonnet and boot lid
- Assembly material

GL 001.100.019

 © LUMMA-Design inquiry
LUMMA PERFORMANCE PACKAGE*
LUMMA performance package*
for LUMMA CLR G800
paintable, easy assembly
consisting of:

- Front spoiler cupsword
- Sidebar cupsword right/left
- Rear diffuser cupsword

Rear diffuser cup splitter not suitable for vehicle with tow bar.

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

GL 001.200.100

 © LUMMA-Design inquiry
REAR DIFFUSER FRAME IN COLOR OF CHOICE
Rear diffuser frame lacquered in color of choice
Non-metallic paint

Metallic paint 15% surcharge
Pearlescent paint 20% surcharge

GL 001.100.136

 © LUMMA-Design inquiry
EXTERIOR PARTS IN COLOR OF CHOICE
Exterior parts: Air inlet covers, side skirt design covers, front spoiler bottom part lacquered in color of choice
Non-metallic paint

Metallic paint 15% surcharge
Pearlescent paint 20% surcharge

GL 001.100.137

 © LUMMA-Design inquiry
DOOR HANDLE COVER IN COLOR OF CHOICE
door handle cover lacquered in color of choice
Non-metallic paint

Metallic paint 15% surcharge
Pearlescent paint 20% surcharge

GL 001.100.138

lumma piktogramme 301 lackieren.jpg © LUMMA-Design inquiry
REAR DECORATIVE STRIP IN COLOR OF CHOICE
Rear decorative strip lacquered in color of choice
Non-metallic paint

Metallic paint 15% surcharge
Pearlescent paint 20% surcharge

GL 001.100.139

 © LUMMA-Design inquiry
LUMMA FRONT SPOILER LIP SUITABLE FOR AMG FRONT
LUMMA front spoiler lip suitable for AMG front
paintable
part certificate of conformity

GL 100.100.001

 © LUMMA-Design inquiry
LUMMA FENDER COVERS WITH DESIGN FINS
LUMMA fender covers with design fins
paintable
only for rebuilding kit CLR G800

GL 100.100.016

 © LUMMA-Design inquiry
LUMMA REAR SPOILER LIP
LUMMA rear spoiler lip
paintable
part certificate of conformity (standard german)

GL 200.100.015

 © LUMMA-Design inquiry
LUMMA ROOF SPOILER
LUMMA roof spoiler
paintable
part certificate of conformity (standard german)

GL 300.100.020

 © LUMMA-Design inquiry


LUMMA EXTERIOR - CARBON BLACK

IDENTIFICATION PART NO. FIGURE INQUIRY
AIR INLET COVER FRONT LEFT+RIGHT
Air inlet cover front left+right
in visible carbon fibre
only for Bodykit CLR G800

GL 001.103.C00

 © LUMMA-Design inquiry
SIDE SKIRT DESIGN COVER LEFT+RIGHT
Side skirt design cover left+right
in visible Carbon fibre
only for Bodykit CLR G800

GL 001.103.C01

 © LUMMA-Design inquiry
AIR INLET COVER REAR DOOR LEFT+RIGHT
Air inlet cover rear door left+right
in visible carbon fibre
only for Bodykit CLR G800

GL 001.103.C02

 © LUMMA-Design inquiry
AIR OUTLET COVER ON REAR BUMPER LEFT+RIGHT
Air outlet cover on rear bumper left+right
in visible carbon fibre
only for Bodykit CLR G800

GL 001.103.C03

 © LUMMA-Design inquiry
OUTSIDE MIRROR CAPS IN VISIBLE CARBON FIBRE
Outside mirror caps in visible carbon fibre
Surcharge at delivery of serial outside mirror caps

GL 001.103.C06

 © LUMMA-Design inquiry
OUTSIDE MIRROR CAPS IN VISIBLE CARBON FIBRE
Outside mirror caps in visible carbon fibre - new part

GL 001.103.C07

 © LUMMA-Design inquiry
DOOR HANDLE COVER UPPER PARTS IN VISIBLE CARBON FIBRE
Door handle cover upper parts in visible carbon fibre
Surcharge at delivery of serial parts

GL 001.103.C08

 © LUMMA-Design inquiry
DOOR HANDLE COVER UPPER PARTS IN VISIBLE CARBON FIBRE
Door handle cover upper parts in visible carbon fibre
new parts

GL 001.103.C09

 © LUMMA-Design inquiry
REAR DECORATIVE STRIP IN VISIBLE CARBON FIBRE
Rear decorative strip in visible carbon fibre
Surcharge at delivery of serial part

GL 001.103.C10

 © LUMMA-Design inquiry
REAR DECORATIVE STRIP IN VISIBLE CARBON FIBRE
Rear decorative strip in visible carbon fibre
new part

GL 001.103.C11

 © LUMMA-Design inquiry
LUMMA REAR SPOILER LIP VISIBLE CARBON FIBRE FINISH
LUMMA rear spoiler lip visible carbon fibre finish
ready for assembly
part certificate of conformity (standard german)

GL200.200.C02

 © LUMMA-Design inquiry
LUMMA ROOF SPOILER IN VISIBLE CARBON FIBRE FINISH
LUMMA roof spoiler in visible Carbon fibre finish;
ready for assembly
part certificate of conformity (standard german)

GL300.200.C03

 © LUMMA-Design inquiry
SERIAL FRONT GRILLE BARS (GENUINE AMG) IN VISIBLE CARBON FIBRE
Serial front grille bars (genuine AMG) in visible carbon fibre
Surcharge at delivery of serial front grille bars

GL 001.103.C04

 © LUMMA-Design inquiry
SERIAL FRONT GRILLE BARS (GENUINE AMG) IN VISIBLE CARBON FIBRE
Serial front grille bars (genuine AMG) in visible carbon fibre
new part

GL 001.103.C05

 © LUMMA-Design inquiry
LUMMA SPORT-LOOK ENGINE BONNET*
LUMMA sport-look engine bonnet*
in carbon finish, with mesh set

*Important Notice for consumers: Without part certificate. This article is not for use in the public road traffic allowed - use only for racing purposes!
By installing this article, the vehicle's operating permit will expire.

GL 500.200.C04

 © LUMMA-Design inquiry
SURCHARGE LACQUERING BICOLOR
Surcharge lacquering Sportlook bonnet in carbon version bicolor
lateral parts in vehicle color

GL 500.200.C07

lumma piktogramme 301 lackieren.jpg © LUMMA-Design inquiry


LUMMA CHASSIS / WHEELS - SET OF SPACERS

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA PERFORMANCE SPACER SET FOR CLR G800
LUMMA Performance spacer set for CLR G800
consisting of:

1 set FA spacers 25mm/side
1 set RA spacers 45mm/side
16 wheel bolts black M14x1,5x37
4 rim clips black
2 wheel locks

Suitable for wheel set CLR Racing with Bodykit

With part certificate

GL 025.045.100

 © LUMMA-Design inquiry


LUMMA CHASSIS / WHEELS - ALLOY RIMS

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA SPORT RIM CLR RACING, 12X22
LUMMA SPORT RIM CLR RACING black smoke, 12X22
PCD: 5x112 NB: 66,6 offset 35
* suitable for series car (just rear axle), recommended tyres 325/35 R22 *

With part certificate

FE022.012.B10

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORTRIM CLR 22 LX 10X22
LUMMA sportrim CLR 22 LX 10x22
Colour Black Smoke
PCD 5x112, HB 66,6 offset 35
Also fitting for standard vehicle

With part certificate

FE022.010.G10

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORTRIM CLR 22 LX 12X22*
LUMMA sportrim CLR 22 LX 12x22*
Colour Black Smoke
PCD 5x112, HB 66,6 offset 35
Also fitting for standard vehicle

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE022.012.G10

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR RACING BLACK-SMOKE , 10X22
LUMMA SPORT RIM CLR RACING black smoke, 10X22
PCD 5x112, CB 66.6mm, offset 45
* suitable for series car, recommended tyres 285/40 R22 *

With part certificate

FE022.010.B06

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR 23 GT, 11X23
LUMMA SPORT RIM CLR 23 GT black matte, 11x23
PCD 5x112, CB 66.6mm, offset 45
With hub cap in central locking design
* Suitable for serial car, recommended tyres 305/30 R23 *

With part certificate

FE023.011.C11/C12

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA CLR RACING 2 11X23*
LUMMA CLR Racing 2 11x23 black matte*
PCD: 5x112, HB: 66,6 ET40
With hub cap in centre locking design

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE023.011.E13

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR 24 RS 10,5X24*
LUMMA Sport rim CLR 24 RS black matte 10,5x24*
PCD 5x120, CB 74,1 mm, offset 40
with hub cap in central locking design
* Recommended tyres 295/30 R24 *
Suitable for front and rear axle

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE024.105.D13

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR 24 RS, 13X24*
LUMMA Sport rim CLR 24 RS black matte, 13x24*
PCD 5x120, CB 74,1 mm, offset 38
with hub cap in central locking design
* Recommended tyres 355/25 R24 *
Only fitting for rear axle

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

F024.013.D14

 © BILD_COPYRIGHT_DEFAULT inquiry


LUMMA INTERIOR - ALUMINUM

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA ALUMINIUM PEDAL SET
LUMMA Aluminium pedal set in silver alu finish with black rubber nubs, anti-slip
consisting of gas-, brake pedal and footrest
*In Alu finish black anodized on request against surcharge*

GL 800.100.100

 © LUMMA-Design inquiry


LUMMA INTERIOR - FLOOR MATTS BOOTMAT

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA FLOOR MATS
LUMMA floor mats in black for front + back
real leather mounting with double stiching and LUMMA emblem

Fiber material: 100% polyamide 6.6
Pile weight: 550 +/- 10%
Surface structure: tufted suede
Edging: leather
Back coating: latex fine embossing

GL 800.200.000

 © LUMMA-Design inquiry


LUMMA INTERIOR - TRUNK MAT

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA BOOT MAT
LUMMA boot mat in black
real leather mounting with double stiching and LUMMA emblem

Fiber material: 100% polyamide 6.6
Pile weight: 550 +/- 10%
Surface structure: tufted suede
Edging: leather
Back coating: latex fine embossing

GL 800.200.100

 © LUMMA-Design inquiry


LUMMA MORE - ACCESSOIRES

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA KEY CHAIN CREST LOGO LEATHER STRAP BLACK
LUMMA key chain crest logo leather strap black
in present box with LUMMA logo

SAH520

 © LUMMA-Design inquiry
LUMMA KEY CHAIN CREST LOGO METAL VERSION
LUMMA key chain crest logo metal version
in present box with LUMMA logo

SAH500

 © LUMMA Design GmbH & Co. KG inquiry
LUMMA KEY CHAIN PLATE METAL VERSION
LUMMA key chain plate metal version
In present box with LUMMA logo

SAH510

 © LUMMA Design GmbH & Co. KG inquiry
TYPE LETTERING WITH CREST LOGO CLR G800
Type lettering with crest logo CLR G800
self adhesive

AKL800RAA

 © LUMMA-Design inquiry
TYPE LETTERING WITH CREST LOGO CLR G800
Type lettering with crest logo CLR G800
on mounting plate with grub screws
suitable for front grille

AKLTR007

 © LUMMA-Design inquiry
LUMMA SNAPBACK CAP SIGNATURE EDITION GREY
LUMMA Snapback cap "signature edition" GREY
In present box

MATERIAL:
FRONT: 85% acrylic, 15% wool
BACK: 100% polyester

SAH600

 © LUMMA Design GmbH & Co. KG inquiry
LUMMA SNAPBACK CAP SIGNATURE EDITION BLACK
LUMMA Snapback cap "signature edition" BLACK
In present box

MATERIAL:
FRONT: 85% acrylic, 15% wool
BACK: 100% polyester

SAH610

 © LUMMA Design GmbH & Co. KG inquiry




LUMMA CONTACT

Interested in one of the refinement products? We are pleased to contact you for non-binding advice. We recommend to use the contact support.


LUMMA Design GmbH & Co. KG,

Weinstetter Strasse 5
72474 Winterlingen
Deutschland

+49 (0) 7577 / 933729-0
info@lumma-design.com


LUMMA QR-CODE

You can download this page directly to your phone.


HINT:

A QR-Code-scanner for your smartphone or tablet and a mobile internet-connection is required. Hereby costs can arise.

LUMMA QR-Code