LUMMA TUNINGSPARTS CLR R GT EVO
CURRENT AVAILABLE REFINEMENT COMPONENTS BY LUMMA-DESIGN

 © LUMMA-Design
EVO Front 4 © LUMMA-Design
EVO Heck © LUMMA-Design
 © LUMMA-Design
 © LUMMA-Design

LUMMA EXTERIOR - AERODYNAMIC

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA REBUILDING KIT CLR-R GT EVO CLR RACING*
LUMMA Rebuilding kit CLR-R GT EVO CLR Racing*
ONLY for cars WITHOUT rollout sidestep

- front spoiler bumper with frame for double daytime running light
- front spoiler bottom part
- wheel arch enlarging front and rear
- door paneling for all 4 doors
- rear bumper with rear diffuser (NOT for trailer coupling)
- daytime running light kit 4-pcs., chrom-design
- Rim set LUMMA CLR Racing smoke black, 12x22 ET35 - recommended tires 305/35-22
- performance wheel spacers, front 22mm rear 47mm
- sport end muffler stainless steel supersound, export construction center 3x100mm with LUMMA Logo
- adapter for series pre silencer
- type lettering LUMMA CLR R 2-fold for front and rear
- assembly material
- type plate with consecutive serial number

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RE 400.100.000

 © LUMMA-Design inquiry
LUMMA REBUILDING KIT CLR-R GT EVO CLR 23 GT*
LUMMA Rebuilding kit CLR-R GT EVO CLR 23 GT*
ONLY for cars WITHOUT rollout sidestep

composed of:
- front spoiler bumper with frame for double daytime running light
- front spoiler bottom part
- wheel arch enlarging front and rear
- door paneling for all 4 doors
- rear bumper with rear diffuser (NOT for trailer coupling)
- daytime running light kit 4-pcs., chrom-design
- Rim set LUMMA CLR 23 GT black mat, 11x23 ET40 - recommended tires 305/30-23
- performance wheel spacers front 22mm rear 47mm
- sport end muffler stainless steel supersound, export construction center 3x100mm with LUMMA Logo
- adapter for series pre silencer
- type lettering LUMMA CLR R 2-fold for front and rear
- assembly material
- type plate with consecutive serial number

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RE 400.100.002

 © LUMMA-Design inquiry
ASSEMBLY AND LAQUER FINISHING REBUILDING KIT CLR R GT EVO
Assembly and laquer finishing Rebuilding kit CLR R GT EVO
Non-metallic paint

Metallic paint 15% surcharge
Pearlescent paint 20% surcharge

RE 400.100.101

lumma piktogramme 301 lackieren.jpg © LUMMA-Design inquiry
LUMMA SPORT FRONT GRILLE CLR R VERSION II*
LUMMA sport front grille CLR R version II, with plastic mesh in black, paintable*
Not fitting for vehicle from MY 2018

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RR 100.200.012

 © LUMMA-Design inquiry
LUMMA SPORT FRONT GRILLE CLR R VERSION I WITH MESH*
LUMMA sport front grille CLR R version I with bar and aluminium mesh black, paintable*
Not fitting for vehicle from MY 2018

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RRS 100.200.010

Range Rover 2013 Tuning © LUMMA-Design inquiry
LUMMA SPORT-LOOK ENGINE HOOD CLR R*
LUMMA sport-look engine hood CLR R solid-carbon with air vent openings, paintable*
Not fitting for vehicle from MY 2018

*Important Notice for consumers: Without part certificate. This article is not for use in the public road traffic allowed - use only for racing purposes!
By installing this article, the vehicle's operating permit will expire.

RRS 200.100.010

 © LUMMA-Design inquiry
LUMMA ROOF SPOILER CLR R*
LUMMA roof spoiler CLR R, paintable*

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RRS 300.200.014

 © LUMMA-Design inquiry
LUMMA REAR SPOILER LIP CLR R, PAINTABLE*
LUMMA rear spoiler lip CLR R, paintable*

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RRS 300.100.100

 © LUMMA-Design inquiry


LUMMA EXTERIOR - CARBON BLACK

IDENTIFICATION PART NO. FIGURE INQUIRY
MIRROR CAP SET CARBON-DESIGN
Mirror cap set carbon-design, mirror upper part left & right

RRS 600.300.100

Range Rover 2013 Tuning © LUMMA-Design inquiry
DECORATIVE TRIM FRONTAL COVERING CARBON-DESIGN
Decorative trim frontal covering carbon-design, 3-pcs., center, left & right

RRS 600.300.200

Range Rover 2013 Tuning © LUMMA-Design inquiry
DECORATIVE TRIM SET OF 6-PCS
Decorative trim set of 6-pcs., carbon-design, sidewise composed of door front, rear and side frame rear left & right (without door panel)

RRS 600.300.210

Range Rover 2013 Tuning © LUMMA-Design inquiry
DOOR COVER PLATE LEFT & RIGHT CARBON-DESIGN
Door cover plate left & right carbon-design, complete carbon to adhesive

RRS 600.300.300

Range Rover 2013 Tuning © LUMMA-Design inquiry
ENGINE HOOD COVER, CARBON-DESIGN,
Engine hood cover, carbon-design, solid carbon part to adhesive
Not fitting for vehicle from MY 2018

RRS 600.500.100

Range Rover 2013 Tuning © LUMMA-Design inquiry
REAR TRIM STRIP
Rear trim strip without rear view camera, carbon-design

RRS 600.400.110

Range Rover 2013 Tuning © LUMMA-Design inquiry
REAR TRIM STRIP FOR REAR VIEW CAMERA
Rear trim strip for rear view camera, carbon-design

RRS 600.400.100

Range Rover 2013 Tuning © LUMMA-Design inquiry
LUMMA SPORT-LOOK ENGINE HOOD, CARBON-DESIGN*
LUMMA sport-look engine hood, carbon-design
Not fitting for vehicle from MY 2018

*Wichtiger Verbraucherhinweis: Ohne ABE/Teilegutachten. Dieser Artikel ist nicht für die Nutzung im öffentlichen Straßenverkehr zulässig – Einsatz nur für Rennsportzwecke!
Durch Montage dieses Artikels erlischt die ABE des Fahrzeugs.

RRS 600.100.101

 © LUMMA-Design inquiry
LUMMA SPORT FRONT GRILLE, CARBON-DESIGN*
LUMMA sport front grille, carbon-design*
Not fitting for vehicle from MY 2018

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RRS 600.100.201

 © LUMMA-Design inquiry
LUMMA REAR SPOILER LIP, CARBON-DESIGN*
LUMMA rear spoiler lip, carbon-design*

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RR 600.200.001

 © LUMMA-Design inquiry


LUMMA CHASSIS / WHEELS - SET OF SPACERS

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA SET OF SPACERS
LUMMA set of spacers, suitable for wheel set CLR Racing, front 22 mm, rear 47 mm
Only suitable in combination with rebuilding Kit CLR R, CLR R GT EVO or CLR RS

With part certificate

RR 900.200.011

 © LUMMA-Design inquiry
LUMMA SET OF SPACERS, 20 MM PER SIDE
LUMMA set of spacers, 20 mm per side, suitable fo 1 axle (2 pcs.)
Suitable for series wheels and series car

With part certificate

RRS 900.200.020

 © LUMMA-Design inquiry


LUMMA CHASSIS / WHEELS - ALLOY RIMS

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA SPORT RIM CLR 24 SPORT 10X24 BLACK GLOSS*
LUMMA Sport rim CLR 24 Sport black-gloss,forged 10x24
offset 40, PCD 5x112, CB 66,6 mm, for MB
incl. hub cap in central locking design

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE024.010E01

 © LUMMA Design GmbH & Co. KG inquiry
LUMMA SPORT RIM CLR 24 SPORT 10X24 BLACK FRONT POLISHED*
LUMMA Sport rim CLR 24 Sport black-polished,forged 10x24
offset 40, PCD 5x112, CB 66,6 mm, for MB
incl. hub cap in central locking design

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE024.010E02

 © LUMMA Design GmbH & Co. KG inquiry
LUMMA SPORT RIM CLR 24 SPORT 12X24 BLACK GLOSS*
LUMMA Sport rim CLR 24 Sport black-gloss,forged 12x24
offset 40, PCD 5x112, CB 66,6 mm, for MB
incl. hub cap in central locking design

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE024.012E01

 © LUMMA Design GmbH & Co. KG inquiry
LUMMA SPORT RIM CLR 24 SPORT 12X24 BLACK FRONT POLISHED*
LUMMA Sport rim CLR 24 Sport black-polished,forged 12x24
offset 40, PCD 5x112, CB 66,6 mm, for MB
incl. hub cap in central locking design

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE024.012E02

 © LUMMA Design GmbH & Co. KG inquiry
LUMMA SPORT RIM CLR RACING BLACK-SMOKE, 12X22*
LUMMA Sportrim CLR Racing black-smoke, 12x22*
PCD 5x120, CB 74.1mm, offset 35

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE022.012.B01

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR 22 LX 10X22*
LUMMA sport rim CLR 22 LX 10x22*
PCD: 5x120, CB: 74,1, offset 35
Colour: Black Smoke

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE022.010.G01

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR 22 LX 12X22*
LUMMA sport rim CLR 22 LX 10x22*
PCD: 5x120, CB: 74,1, offset 35
Colour: Black Smoke

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE022.012.G01

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR LN1 10X22*
LUMMA sport rim CLR LN1 black matte 10x22*
PCD 5x120, CB 74.1, offset 35
Inclusive hub cap in central locking design
Also suitable for series car

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE022.010.E01

CLR LN1 black © LUMMA-Design inquiry
LUMMA SPORT RIM CLR LN1 BLACK MATTE 12X22*
LUMMA sport rim CLR LN1 black matte 12x22*
PCD 5x120, CB 74.1, offset 35
Inclusive hub cap in central locking design

Only in connection with the LUMMA bodykit CLR R, CLR R GT EVO, CLR RS, CLR SV, CLR F

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE022.012.E01

CLR LN1 black © LUMMA-Design inquiry
LUMMA SPORT RIM CLR RACING BLACK-SMOKE , 10X22*
LUMMA sport rim CLR Racing black-smoke, 10x22*
PCD 5x120, CB 74.1mm, offset 35
incl. wheel nut black

Also suitable for series car, recommended tyres 295/35-22

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE022.010.B01

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR RACING 2 11X23*
LUMMA sport rim CLR Racing 2 11x23 black matte*
PCD: 5x120, NB: 74,1, offset 40
with hub cap in centre lock design

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE023.011.E09

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR 23 GT BLACK MAT*
LUMMA sport rim CLR 23 GT 11x23, black mat*
with design ring silver
PCD 5x120, CB 74.1mm, offset 40 for BMW+RR

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE023.011.C02

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR 24 RS 10,5X24*
LUMMA sport rim CLR 24 RS 10,5x24 black mat*
in multi part appearance with centre locking design cap
PCD: 5x120 HB: 74,1 ET40

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE024.105.D09

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR 24 RS 13X24*
LUMMA sport rim CLR 24 RS 13x24 black matte*
in multi part appearance with centre locking design cap
PCD: 5x120 HB: 74,1 ET40

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE024.013.D09

 © BILD_COPYRIGHT_DEFAULT inquiry


LUMMA INTERIOR - ALUMINUM

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA ALUMINIUM PEDAL SET
LUMMA Aluminium pedal set, consisting of gas-, brake pedal and footrest

With part certificate

RRS 000.300.000

 © LUMMA-Design inquiry


LUMMA INTERIOR - FLOOR MATTS BOOTMAT

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA FLOOR MATS BLACK, SET FRONT + REAR
LUMMA floor mats black, set of 3-pieces with leather mount and LUMMA logo
with double stitching in black

Fiber material: 100% polyamide 6.6
Pile weight: 550 +/- 10%
Surface structure: tufted suede
Edging: leather
Back coating: latex fine embossing

RRS 000.100.100

 © LUMMA-Design inquiry
LUMMA FLOOR MAT SET FRONT + REAR
LUMMA floor mat set of 3-pieces, with leather mount and LUMMA logo, color at choice
with double stitching colour at choice

Fiber material: 100% polyamide 6.6
Pile weight: 550 +/- 10%
Surface structure: tufted suede
Edging: leather
Back coating: latex fine embossing

RRS 000.100.110

 © LUMMA-Design inquiry


LUMMA MORE - ACCESSOIRES

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA KEY CHAIN CREST LOGO LEATHER STRAP BLACK
LUMMA key chain crest logo leather strap black
in present box with LUMMA logo

SAH520

 © LUMMA-Design inquiry
LUMMA KEY CHAIN CREST LOGO METAL VERSION
LUMMA key chain crest logo metal version
in present box with LUMMA logo

SAH500

 © LUMMA Design GmbH & Co. KG inquiry
LUMMA KEY CHAIN PLATE METAL VERSION
LUMMA key chain plate metal version
In present box with LUMMA logo

SAH510

 © LUMMA Design GmbH & Co. KG inquiry
LUMMA CLR GT EVO ADHESIVE EMBLEM LOGO
Lumma CLR GT EVOadhesive emblem logo
color: silver mat, black, red
format: 100 x 48 mm

AKL 404 BLA

 © LUMMA-Design inquiry
LUMMA SIGNATURE CHROME
"LUMMA" signature, approx. 110mm x 45mm chrome, self-adhesive

AKL 430 RAA

 © LUMMA-Design inquiry
LUMMA SIGNATUR SCHWARZ
"LUMMA" Signature, approx. 110mm x 45mm black, self-adhesive

AKL 429RAA

 © LUMMA-Design inquiry
LUMMA VALVE CAP 4-PCS.
LUMMA valve cap 4-pcs.

PM 45.1000

 © LUMMA-Design inquiry
LUMMA DESIGN LICENSE PLATE PAT
LUMMA Design license plate pat with embossed chrome logo signature LUMMA length 52 cm

KU 0041 WUC

 © LUMMA-Design inquiry
LUMMA DESIGN LICENSE PLATE PAT
LUMMA Design license plate pat with embossed gold logo signature LUMMA length 52 cm

KU 0043WUC

 © LUMMA-Design inquiry
LUMMA DESIGN EMBLEM (EMBLEM PROFILE)
LUMMA Design emblem (emblem profile), self-adhesive

AKL 400 RAA

 © LUMMA-Design inquiry
LUMMA SNAPBACK CAP SIGNATURE EDITION GREY
LUMMA Snapback cap "signature edition" GREY
In present box

MATERIAL:
FRONT: 85% acrylic, 15% wool
BACK: 100% polyester

SAH600

 © LUMMA Design GmbH & Co. KG inquiry
LUMMA SNAPBACK CAP SIGNATURE EDITION BLACK
LUMMA Snapback cap "signature edition" BLACK
In present box

MATERIAL:
FRONT: 85% acrylic, 15% wool
BACK: 100% polyester

SAH610

 © LUMMA Design GmbH & Co. KG inquiry




LUMMA CONTACT

Interested in one of the refinement products? We are pleased to contact you for non-binding advice. We recommend to use the contact support.


LUMMA Design GmbH & Co. KG,

Weinstetter Strasse 5
72474 Winterlingen
Deutschland

+49 (0) 7577 / 933729-0
info@lumma-design.com


LUMMA QR-CODE

You can download this page directly to your phone.


HINT:

A QR-Code-scanner for your smartphone or tablet and a mobile internet-connection is required. Hereby costs can arise.

LUMMA QR-Code