LUMMA TUNINGSPARTS CLR SV
CURRENT AVAILABLE REFINEMENT COMPONENTS BY LUMMA-DESIGN

 © LUMMA-Design
 © LUMMA-Design
 © LUMMA-Design
 © LUMMA-Design
 © LUMMA-Design

LUMMA EXTERIOR - AERODYNAMIC

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA REBUILDING KIT CLR SV CLR RACING
LUMMA Rebuilding kit CLR SV with wheel set CLR Racing
ONLY for cars WITHOUT rollout sidestep

material: PU RIM
composed of:
- Frontspoiler bumper
- Front spoiler bottom part / cup spoiler splitter
- Wheel arch enlarging front and rear
- Door paneling for all 4 doors,
- Rear apron bumper with rear diffuser
- daytime running light kit 4-pcs., fibre optic
- Rim set LUMMA CLR Racing sport-rim, black-smoke, 12x22 ET 35* - recommended tires 305/35-22
- Performance wheel spacers, front 22mm, rear 47mm
- Stainless steel sport muffler
incl. chrom design end pipes square
- Type lettering LUMMA CLR SV 2-fold for front and rear
- LUMMA decor stripe set lateral color of choice with lettering LUMMA CLR SV
- Assembly material

NOT included in the rebuilding kit is the grille item-no.: RS 001.300.115, pls. order separate !

With part certificate
* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RSV 110.100.006

 © LUMMA-Design inquiry
LUMMA REBUILDING KIT CLR SV WITH CLR 23 GT
LUMMA Rebuilding kit CLR SV with wheel set CLR 23 GT
ONLY for cars WITHOUT rollout sidestep

material: PU RIM
composed of:
- Frontspoiler bumper
- Frontspoiler bottom part / Cup Spoiler splitter
- Wheel arch enlarging front and rear
- Door paneling for all 4 doors,
- rear apron bumper with rear diffuser
- daytime running light kit 4-pcs., fibre optic
- Rim set LUMMA CLR 23 GT sport-rim*, black matt, 11x23 ET 40 - recommended tires 305/30-23
- Performance wheel spacers, front 22mm, rear 47mm
- Stainless steel sport muffler
incl. chrom design end pipes square
- Type lettering LUMMA CLR SV 2-fold for front and rear
- LUMMA decor stripe set lateral color of choice with lettering LUMMA CLR SV
- Assembly material

NOT included in the rebuilding kit is the grille item-no.: RS 001.300.115, pls. order separate !

With part certificate
* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RSV 110.200.005

 © LUMMA-Design inquiry
LUMMA REBUILDING KIT CLR SV WITH CLR 24 RS
LUMMA Rebuilding kit CLR SV with CLR 24 RS
ONLY for cars WITHOUT rollout sidestep

material: PU RIM
composed of:
- Frontspoiler bumper
- Front spoiler bottom part / cup spoiler splitter
- Wheel arch enlarging front and rear
- Door paneling for all 4 doors,
- Rear apron bumper with rear diffuser
- daytime running light kit 4-pcs., fibre optic
- Rim set LUMMA CLR 24 RS black mat*, 10,5x24 - recommended tires 295/30-24
- Performance wheel spacers
- Stainless steel sport muffler
incl. chrom design end pipes square
- Type lettering LUMMA CLR SV 2-fold for front and rear
- LUMMA decor stripe set lateral color of choice with lettering LUMMA CLR SV
- Assembly material

NOT included in the rebuilding kit is the grille item-no.: RS 001.300.115, pls. order separate !

With part certificate
* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RSV110.100.009

 © LUMMA-Design inquiry
LUMMA SPORT FRONT GRILLE CLR SV*
LUMMA Sport front grille CLR SV*
suitable for Range Rover Sport, version with big opening and grille application.
(Not included in the rebuilding kit!)

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RS 001.300.115

 © LUMMA-Design inquiry
LUMMA FENDER COVERS CLR SV*
LUMMA Fender cover set CLR SV*
(not included in the rebuilding kit)
Only fitting for vehicle till MY 2017 (pre-facelift)

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RSV 110.01

 © LUMMA-Design inquiry
LUMMA ROOF SPOILER CLR RS*
LUMMA roof spoiler CLR RS, paintable*, easy stick fitting
Not fitting for vehicle from MY 2018

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RS 001.200.200

 © LUMMA-Design inquiry
LAQUER COSTS ROOF SPOILER
laquer costs roof spoiler CLR RS
Non-metallic paint

Metallic paint 15% surcharge
Pearlescent paint 20% surcharge

RS 001.200.800

lumma piktogramme 301 lackieren.jpg © LUMMA-Design inquiry
ASSEMBLY ROOF SPOILER CLR RS
Assembly roof spoiler CLR RS

RS 001.200.900

lumma piktogramme 301 montieren.jpg © LUMMA-Design inquiry
LUMMA REAR SPOILER LIP CLR RS, PAINTABLE
LUMMA rear spoiler lip CLR RS, paintable
Also fitting for vehicle from MY 2018

With part certificate

RS 003.100.100

 © LUMMA-Design inquiry
LAQUER COSTS REAR SPOILER LIP
laquer costs rear spoiler lip
Non-metallic paint

Metallic paint 15% surcharge
Pearlescent paint 20% surcharge

RS 003.100.800

lumma piktogramme 301 lackieren.jpg © LUMMA-Design inquiry
ASSEMBLY REAR SPOILER LIP CLR RS
Assembly rear spoiler lip CLR RS

RS 003.100.900

lumma piktogramme 301 montieren.jpg © LUMMA-Design inquiry


LUMMA EXTERIOR - CARBON BLACK

IDENTIFICATION PART NO. FIGURE INQUIRY
MIRROR CAP SET CARBON-DESIGN
Mirror cap set carbon-design, mirror upper part left & right

RS 006.003.000

Range Rover 2013 Tuning © LUMMA-Design inquiry
LUMMA ROOF SPOILER CLR RS CARBON-DESIGN*
LUMMA roof spoiler CLR RS carbon-design*

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

RS 006.700.200

 © LUMMA-Design inquiry
LUMMA REAR SPOILER LIP, CARBON-DESIGN
LUMMA rear spoiler lip, carbon-design

With part certificate

RS 006.200.001

 © LUMMA-Design inquiry


LUMMA CHASSIS / WHEELS - ALLOY RIMS

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA SPORT RIM CLR 24 SPORT 10X24 BLACK GLOSS*
LUMMA Sport rim CLR 24 Sport black-gloss,forged 10x24
offset 40, PCD 5x112, CB 66,6 mm, for MB
incl. hub cap in central locking design

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE024.010E01

 © LUMMA Design GmbH & Co. KG inquiry
LUMMA SPORT RIM CLR 24 SPORT 10X24 BLACK FRONT POLISHED*
LUMMA Sport rim CLR 24 Sport black-polished,forged 10x24
offset 40, PCD 5x112, CB 66,6 mm, for MB
incl. hub cap in central locking design

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE024.010E02

 © LUMMA Design GmbH & Co. KG inquiry
LUMMA SPORT RIM CLR 24 SPORT 12X24 BLACK GLOSS*
LUMMA Sport rim CLR 24 Sport black-gloss,forged 12x24
offset 40, PCD 5x112, CB 66,6 mm, for MB
incl. hub cap in central locking design

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE024.012E01

 © LUMMA Design GmbH & Co. KG inquiry
LUMMA SPORT RIM CLR 24 SPORT 12X24 BLACK FRONT POLISHED*
LUMMA Sport rim CLR 24 Sport black-polished,forged 12x24
offset 40, PCD 5x112, CB 66,6 mm, for MB
incl. hub cap in central locking design

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE024.012E02

 © LUMMA Design GmbH & Co. KG inquiry
LUMMA SPORT RIM CLR RACING BLACK-SMOKE, 12X22*
LUMMA Sportrim CLR Racing black-smoke, 12x22*
PCD 5x120, CB 74.1mm, offset 35

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE022.012.B01

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR 22 LX 10X22*
LUMMA sport rim CLR 22 LX 10x22*
PCD: 5x120, CB: 74,1, offset 35
Colour: Black Smoke

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE022.010.G01

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR 22 LX 12X22*
LUMMA sport rim CLR 22 LX 10x22*
PCD: 5x120, CB: 74,1, offset 35
Colour: Black Smoke

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE022.012.G01

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR LN1 10X22*
LUMMA sport rim CLR LN1 black matte 10x22*
PCD 5x120, CB 74.1, offset 35
Inclusive hub cap in central locking design
Also suitable for series car

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE022.010.E01

CLR LN1 black © LUMMA-Design inquiry
LUMMA SPORT RIM CLR LN1 BLACK MATTE 12X22*
LUMMA sport rim CLR LN1 black matte 12x22*
PCD 5x120, CB 74.1, offset 35
Inclusive hub cap in central locking design

Only in connection with the LUMMA bodykit CLR R, CLR R GT EVO, CLR RS, CLR SV, CLR F

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE022.012.E01

CLR LN1 black © LUMMA-Design inquiry
LUMMA SPORT RIM CLR RACING BLACK-SMOKE , 10X22*
LUMMA sport rim CLR Racing black-smoke, 10x22*
PCD 5x120, CB 74.1mm, offset 35
incl. wheel nut black

Also suitable for series car, recommended tyres 295/35-22

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE022.010.B01

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR RACING 2 11X23*
LUMMA sport rim CLR Racing 2 11x23 black matte*
PCD: 5x120, NB: 74,1, offset 40
with hub cap in centre lock design

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE023.011.E09

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR 23 GT BLACK MAT*
LUMMA sport rim CLR 23 GT 11x23, black mat*
with design ring silver
PCD 5x120, CB 74.1mm, offset 40 for BMW+RR

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE023.011.C02

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR 24 RS 10,5X24*
LUMMA sport rim CLR 24 RS 10,5x24 black mat*
in multi part appearance with centre locking design cap
PCD: 5x120 HB: 74,1 ET40

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE024.105.D09

 © BILD_COPYRIGHT_DEFAULT inquiry
LUMMA SPORT RIM CLR 24 RS 13X24*
LUMMA sport rim CLR 24 RS 13x24 black matte*
in multi part appearance with centre locking design cap
PCD: 5x120 HB: 74,1 ET40

* Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany).

FE024.013.D09

 © BILD_COPYRIGHT_DEFAULT inquiry


LUMMA INTERIOR - ALUMINUM

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA ALUMINIUM PEDAL SET
LUMMA aluminium pedal set, consisting of gas-, brake pedal and footrest

With part certificate

RS 000.310.010

 © LUMMA-Design inquiry


LUMMA INTERIOR - FLOOR MATTS BOOTMAT

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA FLOOR MATS BLACK
LUMMA floor mats black, set of 4-pieces with leather mount and LUMMA logo
with double stitching in black

Fiber material: 100% polyamide 6.6
Pile weight: 550 +/- 10%
Surface structure: tufted suede
Edging: leather
Back coating: latex fine embossing

RS 000.101.101

 © LUMMA-Design inquiry
LUMMA FLOOR MATS SET OF 4-PIECES COLOUR AT CHOICE
LUMMA floor mats set of 4-pieces, with leather mount and LUMMA logo, colour at choice
with double stitching colour at choice

Fiber material: 100% polyamide 6.6
Pile weight: 550 +/- 10%
Surface structure: tufted suede
Edging: leather
Back coating: latex fine embossing

RS 000.100.102

 © LUMMA-Design inquiry


LUMMA INTERIOR - TRUNK MAT

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA BOOT MAT BLACK
LUMMA boot mat black, with leather mount and LUMMA logo with double stitching in black

Fiber material: 100% polyamide 6.6
Pile weight: 550 +/- 10%
Surface structure: tufted suede
Edging: leather
Back coating: latex fine embossing

RS 000.002.100

 © LUMMA-Design inquiry
LUMMA BOOT MAT, COLOR AT CHOICE
LUMMA boot mat, with leather mount and LUMMA logo, with double stitching color at choice

Fiber material: 100% polyamide 6.6
Pile weight: 550 +/- 10%
Surface structure: tufted suede
Edging: leather
Back coating: latex fine embossing

RS 000.002.200

 © LUMMA-Design inquiry


LUMMA MORE - ACCESSOIRES

IDENTIFICATION PART NO. FIGURE INQUIRY
LUMMA KEY CHAIN CREST LOGO LEATHER STRAP BLACK
LUMMA key chain crest logo leather strap black
in present box with LUMMA logo

SAH520

 © LUMMA-Design inquiry
LUMMA KEY CHAIN CREST LOGO METAL VERSION
LUMMA key chain crest logo metal version
in present box with LUMMA logo

SAH500

 © LUMMA Design GmbH & Co. KG inquiry
LUMMA KEY CHAIN PLATE METAL VERSION
LUMMA key chain plate metal version
In present box with LUMMA logo

SAH510

 © LUMMA Design GmbH & Co. KG inquiry
LUMMA SIGNATURE CHROME
"LUMMA" signature, approx. 110mm x 45mm chrome, self-adhesive

AKL 430 RAA

 © LUMMA-Design inquiry
LUMMA SIGNATUR SCHWARZ
"LUMMA" Signature, approx. 110mm x 45mm black, self-adhesive

AKL 429RAA

 © LUMMA-Design inquiry
LUMMA DESIGN LICENSE PLATE PAT
LUMMA Design license plate pat with embossed chrome logo signature LUMMA length 52 cm

KU 0041 WUC

 © LUMMA-Design inquiry
LUMMA DESIGN LICENSE PLATE PAT
LUMMA Design license plate pat with embossed gold logo signature LUMMA length 52 cm

KU 0043WUC

 © LUMMA-Design inquiry
LUMMA DESIGN EMBLEM (EMBLEM PROFILE)
LUMMA Design emblem (emblem profile), self-adhesive

AKL 400 RAA

 © LUMMA-Design inquiry
LUMMA SNAPBACK CAP SIGNATURE EDITION GREY
LUMMA Snapback cap "signature edition" GREY
In present box

MATERIAL:
FRONT: 85% acrylic, 15% wool
BACK: 100% polyester

SAH600

 © LUMMA Design GmbH & Co. KG inquiry
LUMMA SNAPBACK CAP SIGNATURE EDITION BLACK
LUMMA Snapback cap "signature edition" BLACK
In present box

MATERIAL:
FRONT: 85% acrylic, 15% wool
BACK: 100% polyester

SAH610

 © LUMMA Design GmbH & Co. KG inquiry




LUMMA CONTACT

Interested in one of the refinement products? We are pleased to contact you for non-binding advice. We recommend to use the contact support.


LUMMA Design GmbH & Co. KG,

Weinstetter Strasse 5
72474 Winterlingen
Deutschland

+49 (0) 7577 / 933729-0
info@lumma-design.com