LUMMA
TUNINGSPARTS CLR X 6 R
CURRENT AVAILABLE REFINEMENT COMPONENTS BY LUMMA-DESIGN
| IDENTIFICATION | PART NO. | FIGURE | INQUIRY |
|---|---|---|---|
|
LUMMA REBUILDING KIT CLR X6 R WITH RIM SET CLR RACING LUMMA Rebuilding Kit CLR X6 R* material: PU RIM composed of: - front spoiler bumper with front guard insert - front spoiler bottom part - frame for daytime running light 2-pcs. - daytime running light kit fibre optic (set of 2)black - fog light kit LED black - wheel arch extensions front and rear - side skirts - rim set LUMMA CLR Racing black-smoke front 10x22 and rear 12x22 - recommended tires 295/30-22 front and 335/25-22 rear - performance set of spacers suitable for wheel set CLR Racing - rear bumper with rear diffuser - sport exhaust muffler centre stainless steel, 2x100mm & 2x70mm with LUMMA Logo - decor stripe set side with lettering "LUMMA CLR X6 R" - lettering LUMMA CLR X6 R - assembly material With part certificate Only for vehicle WITHOUT trailer hitch For vehicle with Night Vision System on request |
BM F16.100.000 |
 |
inquiry |
|
LUMMA REBUILDING KIT CLR X6 R WITH RIM SET CLR 23 GT LUMMA Rebuilding Kit CLR X6 R material: PU RIM composed of: - front spoiler bumper with front guard insert - front spoiler bottom part - frame for daytime running light 2-pcs. - daytime running light kit fibre optic (set of 2) black - fog light kit LED black - wheel arch extensions front and rear - side skirts - rim set LUMMA CLR 23 GT black matt front and rear 11x23 - recommended tires 315/25-23 - performance set of spacers suitable for wheel set CLR 23 GT - rear bumper with rear diffuser - sport exhaust muffler centre stainless steel, 2x100mm & 2x70mm with LUMMA Logo - decor stripe set side with lettering "LUMMA CLR X6 R" - lettering LUMMA CLR X6 R - assembly material With part certificate Only for vehicle WITHOUT trailer hitch For vehicle with Night Vision System on request |
BM F16.100.002 |
|
inquiry |
|
ASSEMBLY AND LAQUER FINISHING REBUILDING KIT CLR X6 R Assembly and lacquer finishing Rebuilding kit CLR X6 R Non-metallic paint Metallic paint 15% surcharge Pearlescent paint 20% surcharge |
BM F16.100.101 |
 |
inquiry |
|
LUMMA SPORT-LOOK ENGINE HOOD* LUMMA sport-look engine hood paintable* with side air vent openings *Important Notice for consumers: Without part certificate. This article is not for use in the public road traffic allowed - use only for racing purposes! By installing this article, the vehicle's operating permit will expire. |
BM F16.100.510 |
 |
inquiry |
|
LACQUER FINISH SPORTLOOK HOOD CLR X6 R Lacquer finish Sportlook hood CLR X6 R Non-metallic paint Metallic paint 15% surcharge Pearlescent paint 20% surcharge |
BM F16.100.520 |
|
inquiry |
|
ASSEMBLY SPORTLOOK HOOD CLR X6 R Assembly Sportlook hood CLR X6 R |
BM F16.100.530 |
 |
inquiry |
|
LUMMA REAR SPOILER LIP CLR X6 R LUMMA rear spoiler lip CLR X6 R paintable With part certificate |
BM F16.100.100 |
 |
inquiry |
|
LAQUER COSTS ROOF SPOILER LIP Laquer costs roof spoiler lip CLR X6 R Non-metallic paint Metallic paint 15% surcharge Pearlescent paint 20% surcharge |
BM F16.100.110 |
|
inquiry |
|
ASSEMBLY REAR SPOILER LIP CLR X6 R Assembly rear spoiler lip CLR X6 R |
BM F16.100.120 |
|
inquiry |
|
LUMMA REAR SPOILER CLR X6 R* LUMMA rear wing CLR X6 R big "GT" paintable* *Important Notice for consumers: Without part certificate. This article is not for use in the public road traffic allowed - use only for racing purposes! By installing this article, the vehicle's operating permit will expire. |
BM F16.100.200 |
 |
inquiry |
|
LAQUER COSTS REAR SPOILER CLR X6 R laquer costs rear spoiler CLR X6 R Non-metallic paint Metallic paint 15% surcharge Pearlescent paint 20% surcharge |
BM F16.100.210 |
|
inquiry |
|
ASSEMBLY REAR WING Assembly rear wing |
BM F16.100.220 |
|
inquiry |
|
LUMMA ROOF SPOILER CLR X6 R LUMMA roof spoiler CLR X6 R, paintable, easy adhesive fitting With part certificate |
BM F16.100.300 |
 |
inquiry |
|
LAQUER COSTS ROOF SPOILER CLR X6 R laquer costs roof spoiler CLR X6 R Non-metallic paint Metallic paint 15% surcharge Pearlescent paint 20% surcharge |
BM F16.100.310 |
|
inquiry |
|
ASSEMBLY ROOF SPOILER CLR X6 R Assembly roof spoiler CLR X6 R |
BM F16.100.320 |
|
inquiry |
| IDENTIFICATION | PART NO. | FIGURE | INQUIRY |
|---|---|---|---|
|
LUMMA SPORT-LOOK ENGINE HOOD SOLID-CARBON* LUMMA sport-look engine hood carbon* middel section in carbon-design with side air vent openings, paintable *Important Notice for consumers: Without part certificate. This article is not for use in the public road traffic allowed - use only for racing purposes! By installing this article, the vehicle's operating permit will expire. |
BM F16.100.500 |
 |
inquiry |
|
MIRROR CAP SET CLR X5 R AND CLR X6 R Mirror cap set carbon-design, mirror upper part left & right |
BM F15.400.100 |
 |
inquiry |
|
ASSEMBLY OUTSIDE MIRROR HOUSING Assembly outside mirror housing |
BM F15.400.105 |
|
inquiry |
|
FRONT KIDNEY LINING CLR X5 RS AND CLR X6 R Front kidney lining CLR X5 RS and CLR X6 R carbon-design, bar black |
BM F15.400.200 |
 |
inquiry |
|
ASSEMBLY FRONT GRILLE LINING Assembly Front grille lining |
BM F15.400.205 |
|
inquiry |
|
ASSEMBLY REAR SPOILER LIP CLR X6 R Assembly rear spoiler lip CLR X6 R |
BM F16.400.405 |
|
inquiry |
|
LUMMA REAR WING CLR X6 R CARBON* LUMMA rear wing CLR X6 R big "GT" carbon version* *Important Notice for consumers: Without part certificate. This article is not for use in the public road traffic allowed - use only for racing purposes! By installing this article, the vehicle's operating permit will expire. |
BM F16.400.410 |
|
inquiry |
|
ASSEMBLY REAR WING Assembly rear wing |
BM F16.400.415 |
|
inquiry |
|
ASSEMBLY ROOF SPOILER CLR X6 R Assembly roof spoiler CLR X6 R |
BM F16.400.425 |
|
inquiry |
| IDENTIFICATION | PART NO. | FIGURE | INQUIRY |
|---|---|---|---|
|
LUMMA ENTRANCE LIGHTING WITH PROJECTION LUMMA Entrance lighting with projection of the LUMMA logo 2 LED to exchange |
BM F16.000.520 |
 |
inquiry |
| IDENTIFICATION | PART NO. | FIGURE | INQUIRY |
|---|---|---|---|
|
LUMMA SET OF SPACERS, SUITABLE FOR WHEEL SET CLR 23 GT FOR SERIES LUMMA set of spacers, suitable for wheel set CLR 23 GT for series car (M package ex works necessary) front 10mm / per side + longer wheel bolts, rear 30mm / per side + longer wheel bolts With part certificate |
BM F15.900.450 |
 |
inquiry |
| IDENTIFICATION | PART NO. | FIGURE | INQUIRY |
|---|---|---|---|
|
ASSEMBLY KIT FOR CLR RACING & CLR LN1 Assembly kit for CLR Racing & CLR LN1 wheels for series vehicle X6 composed of: for rear: spacer set 26 mm per axle, wheel bolt and wheel lock; for front pls. use the BMW original bolts With part certificate |
MK F16.CLRRACING |
 |
inquiry |
|
ASSEMBLY KIT FOR CLR 23 GT Assembly kit for CLR 23 GT wheel series vehicle X6 composed of: spacer set for front 10 mm per axle, rear 40 mm per axle, wheel bolt and wheel lock With part certificate |
MK F16.CLR23GT |
 |
inquiry |
| IDENTIFICATION | PART NO. | FIGURE | INQUIRY |
|---|---|---|---|
|
LUMMA SPORT RIM CLR RACING BLACK-SMOKE, 12X22* LUMMA Sportrim CLR Racing black-smoke, 12x22* PCD 5x120, CB 74.1mm, offset 35 * Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany). |
FE022.012.B01 |
|
inquiry |
|
LUMMA SPORT RIM CLR 22 LX 10X22* LUMMA sport rim CLR 22 LX 10x22* PCD: 5x120, CB: 74,1, offset 35 Colour: Black Smoke * Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany). |
FE022.010.G01 |
|
inquiry |
|
LUMMA SPORT RIM CLR 22 LX 12X22* LUMMA sport rim CLR 22 LX 10x22* PCD: 5x120, CB: 74,1, offset 35 Colour: Black Smoke * Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany). |
FE022.012.G01 |
|
inquiry |
|
LUMMA SPORT RIM CLR LN1 10X22* LUMMA sport rim CLR LN1 black matte 10x22* PCD 5x120, CB 74.1, offset 35 Inclusive hub cap in central locking design Also suitable for series car * Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany). |
FE022.010.E01 |
 |
inquiry |
|
LUMMA SPORT RIM CLR RACING BLACK-SMOKE , 10X22* LUMMA sport rim CLR Racing black-smoke, 10x22* PCD 5x120, CB 74.1mm, offset 35 incl. wheel nut black Also suitable for series car, recommended tyres 295/35-22 * Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany). |
FE022.010.B01 |
|
inquiry |
|
LUMMA SPORT RIM CLR RACING 2 11X23* LUMMA sport rim CLR Racing 2 11x23 black matte* PCD: 5x120, NB: 74,1, offset 40 with hub cap in centre lock design * Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany). |
FE023.011.E09 |
|
inquiry |
|
LUMMA SPORT RIM CLR 23 GT 11X23* LUMMA sport rim CLR 23 GT, black mat with design ring silver* 11x23 ET 40 PCD: 5x120, CB: 74,1, offset 40 Also suitable for series car Additional wheel cover necessary, recommended tyres 315/25-23 Assembly kit is necessary * Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany). |
FE023.011.C02 |
|
inquiry |
|
LUMMA VALVE CAP 4-PCS. LUMMA valve cap 4-pcs. |
BM F15.500.030 |
 |
inquiry |
| IDENTIFICATION | PART NO. | FIGURE | INQUIRY |
|---|---|---|---|
|
LUMMA SPORT SPRING SET LUMMA sport spring set only for cars with self levelling on the front axle - 45 mm rear axle - 40 mm With part certificate |
BM F15.900.600 |
 |
inquiry |
|
ASSEMBLY SPRING SET assembly spring set and electronic wheel alignment and tuning |
BM F16.900.650 |
|
inquiry |
| IDENTIFICATION | PART NO. | FIGURE | INQUIRY |
|---|---|---|---|
|
LUMMA ALUMINIUM PEDAL SET* LUMMA aluminium pedal set, consisting of gas-, break pedal and footrest* * Without part certificate, individual acceptance required, otherwise the vehicle's operating permit will expire (applicable for Germany). |
BM F16.300.000 |
 |
inquiry |
| IDENTIFICATION | PART NO. | FIGURE | INQUIRY |
|---|---|---|---|
|
LUMMA ENTRANCE BORDER SET 4-PIECES IN CARBON LUMMA entrance border set in Carbon, with lettering CLR X6 R 4-pieces |
BM F16.000.510 |
 |
inquiry |
|
ASSEMBLY ENTRANCE BORDER SET Assembly entrance border set |
BM F16.000.515 |
|
inquiry |
| IDENTIFICATION | PART NO. | FIGURE | INQUIRY |
|---|---|---|---|
|
LUMMA FLOOR MAT SET BLACK LUMMA floor mat set of 4-piece with leather mount and LUMMA logo, black Fiber material: 100% polyamide 6.6 Pile weight: 550 +/- 10% Surface structure: tufted suede Edging: leather Back coating: latex fine embossing |
BM F16.101.101 |
 |
inquiry |
| IDENTIFICATION | PART NO. | FIGURE | INQUIRY |
|---|---|---|---|
|
LUMMA BOOT MAT LUMMA boot mat with leather mount and LUMMA logo, black Fiber material: 100% polyamide 6.6 Pile weight: 550 +/- 10% Surface structure: tufted suede Edging: leather Back coating: latex fine embossing |
BM F16.002.100 |
|
inquiry |
| IDENTIFICATION | PART NO. | FIGURE | INQUIRY |
|---|---|---|---|
|
LUMMA KEY CHAIN CREST LOGO LEATHER STRAP BLACK LUMMA key chain crest logo leather strap black in present box with LUMMA logo |
SAH520 |
 |
inquiry |
|
LUMMA KEY CHAIN CREST LOGO METAL VERSION LUMMA key chain crest logo metal version in present box with LUMMA logo |
SAH500 |
 |
inquiry |
|
LUMMA KEY CHAIN PLATE METAL VERSION LUMMA key chain plate metal version In present box with LUMMA logo |
SAH510 |
 |
inquiry |
|
LUMMA ALUMINUM DESIGN EMBLEM Ø 82 MM ADHESIVE LUMMA aluminum Design emblem Ø 82 mm adhesive for hood or rear for all BMW model suitable with Ø 82 mm Logo price per piece |
BM F16.100.450 |
 |
inquiry |
|
LUMMA SIGNATURE CHROM "LUMMA" Signature, approx. 110 mm x 45 mm chrom |
AKL 430 RAA |
 |
inquiry |
|
LUMMA SIGNATUR SCHWARZ "LUMMA" Signature, approx. 110mm x 45mm black, self-adhesive |
AKL 429RAA |
 |
inquiry |
|
LUMMA DESIGN LICENSE PLATE PANEL LUMMA Design license plate panel with chromelogo, 52 cm |
KU 0041 WUC |
 |
inquiry |
|
LUMMA DESIGN LICENSE PLATE PAT LUMMA Design license plate pat with embossed gold logo signature LUMMA length 52 cm |
KU 0043WUC |
 |
inquiry |
|
LUMMA SNAPBACK CAP SIGNATURE EDITION GREY LUMMA Snapback cap "signature edition" GREY In present box MATERIAL: FRONT: 85% acrylic, 15% wool BACK: 100% polyester |
SAH600 |
 |
inquiry |
|
LUMMA SNAPBACK CAP SIGNATURE EDITION BLACK LUMMA Snapback cap "signature edition" BLACK In present box MATERIAL: FRONT: 85% acrylic, 15% wool BACK: 100% polyester |
SAH610 |
 |
inquiry |
Interested in one of the refinement products? We are pleased to contact you for non-binding advice. We recommend to use the contact support.
| LUMMA Design GmbH & Co. KG, |
|||||
|---|---|---|---|---|---|
|
Weinstetter Strasse 5 72474 Winterlingen Deutschland |
|
||||
You can download this page directly to your phone.
HINT:
A QR-Code-scanner for your smartphone or tablet and a mobile internet-connection is required. Hereby costs can arise.
